Waterproofing adhesive SIKABOND T8 10L
It is a one-component elastic tile adhesive.
- One component, ready to use.
- Fast curing.
- Can be glued to old tiles.
- Reduces stress on the substrate: the elastic adhesive reduces transverse stress between the tile and the substrate.
- Compensation for tolerances in the bearing surfaces.
- Good adhesion to most common building materials.
188,40€ TTC
It is a one-component elastic tile adhesive.
- One component, ready to use.
- Fast curing.
- Can be glued to old tiles.
- Reduces stress on the substrate: the elastic adhesive reduces transverse stress between the tile and the substrate.
- Compensation for tolerances in the bearing surfaces.
- Good adhesion to most common building materials.
USES :
SikaBond -T8 is an adhesive for waterproofing your ceramic floor. With SikaBond -T8 a waterproofing and bonding layer is created for ceramic parts on concrete, mortar and old tiles. For balconies, terraces, loggias, kitchens, bathrooms and other areas exposed to water.
BENEFITS :
- One component, ready to use.
- Fast curing.
- Can be glued to old tiles.
- Reduces stress on the substrate: the elastic adhesive reduces transverse stress between the tile and the substrate.
- Compensation for tolerances in the bearing surfaces.
- Good adhesion to most common building materials.
- Bonding and waterproofing in one product.
- Reduces the transmission of impact noise.
PACKAGING :
- 10 litre bucket
COLOUR :
- Ochre
Chemical basis :
Polyurethane
Conservation :
12 months from the date of manufacture.
Storage conditions :
In its original, well-sealed and intact packaging. In a dry and cool place, between +10ºC and +25ºC. Protect from direct sunlight.
Density :
| 1.35kg/l approx. | (ISO1183-1) |
Shore A hardness :
| Approximately. 35 (after 28 jours) | (ISO868) |
Tensile strength :
| 1,5 N / mm2 approx. | (ISO37) |
Shear strength :
| ~1 N/mm2 for a layer thickness of 1 mm | (EN1465) |
Operating temperature :
-40º C à +70º C
Thixotropy :
Consistency :
Spreads easily, trowel marks are stable.
Ambient temperature :
Between +5º C and +35º C. Pay attention to the dew point.
Relative air humidity :
30% – 90%
Supporting temperature :
Between +5º C and +35º C
Substrate moisture :
< 6%
Permitted moisture content of the substrate: < 6% CM
Curing time :
Trafficable 12-24h (depending on weather)
Final treatment 1-2 days (depending on the weather)
Skin formation time/placement time :
| ~45 min (depending on weather conditions). | (CQP 019-1) |
Consumption :
Waterproofing layer :
Between 2.0 – 2.7 kg/m 2 with a metal trowel in a 2 mm thick layer (depending on the quality of the substrate).
Coat
Approx. 1.5 kg/m 2 with notched trowel (min. 4 x 4 mm teeth / C1 trowel).
SikaBond -T8 consumption is lower on primed substrates.
Reviews
There are no reviews yet.