Refractory mortar SIKA MonoTop 100 fire resistant 5 kg
Fast setting refractory mortar for laying refractory bricks and for the construction and repair of heat resistant elements.
- High thermal resistance. Resistant up to 750°C
- High initial resistance
- Easy to mix
45,60€ TTC
Fast setting refractory mortar for laying refractory bricks and for the construction and repair of heat resistant elements.
- High thermal resistance. Resistant up to 750°C
- High initial resistance
- Easy to mix
USES :
- Construction and repair of heat-resistant elements (e.g. barbecues, fireplaces, ovens, etc.)
- Specially designed as a filler and joint mortar for tiles and refractory bricks, breeze blocks, clay bricks subject to high operating temperatures.
- Smoothing mortar for high operating temperatures
BENEFITS :
- High thermal resistance. Resistant up to 750°C
- High initial resistance
- easy to mix
- easy to apply
PACKAGING :
- 5kg plastic bags
COLOUR :
- Grey powder
Chemical base: Aluminous cement, aggregates and selected aggregates
Storage: 6 months
Storage conditions: Store in its original, undamaged packaging in a cool, dry place at a temperature of between +5°C and +35°C. Protect from direct sunlight and frost.
Density :
| Dry mortar | ~1.8kg/l |
| Fresh mortar | ~2.0kg/l |
Maximum particle size :
Compression force :
| ~37 MPa after 24 hours | (EN 196-1) |
Flexural strength :
| ~5 MPa after 24 hours | (EN 196-1) |
Mixing ratio: 0.55 to 0.65 litres of water for 5 kg of powder
Coat thickness: Min.6mm / Max. 20mm
Ambient temperature: +5°Cmin; +30°C max
Support temperature: +5°Cmin; +30°C max
Pot life: ~60 minutes at +20°C
Consumption :
This depends on the roughness of the substrate and the thickness of the applied layer. As a guide, 1.8 kg of powder per mm of thickness per m 2
Performance: 5 kg of powder corresponds to approximately 2.8 litres of mortar
Reviews
There are no reviews yet.