Sikafloor-Level 50 exterior self-levelling mortar 25 kg

5/5
Self-levelling cementitious mortar for indoor and outdoor industrial floors.
Sikafloor® Level-50 is a single component, polymer modified, self-levelling, pumpable cementitious plaster for levelling and smoothing industrial floors. It is suitable as a top coat or can be overlaid to provide additional mechanical or chemical protection.
  • Self-levelling
  • Fast application due to good flowability and cohesion of the fresh product
  • Easy to apply by hand or machine

128,40 TTC

Self-levelling cementitious mortar for indoor and outdoor industrial floors.
Sikafloor ® Level-50 is a single component, polymer modified, self-levelling, pumpable cementitious plaster for levelling and smoothing industrial floors. It is suitable as a top coat or can be overlaid to provide additional mechanical or chemical protection.
  • Self-levelling
  • Fast application due to good flowability and cohesion of the fresh product
  • Easy to apply by hand or machine

APLICACIONES: Sikafloor ® Level-50 puede aplicarse manualmente o mediante bombeo en suelos con un nivel entre 5 y 25 mm.

  • Suitable for indoor and outdoor industrial applications
  • Rehabilitation of car park pavements with moderate traffic, without the need for an overlay
  • Levelling layer for finishing with resin or paint systems for floors
  • Screed layer for screeds and cementitious coatings

BENEFITS :

  • Self-levelling
  • Fast application due to good flowability and cohesion of the fresh product
  • Easy to apply by hand or machine
  • Suitable for levelling thicknesses from 5 to 25 mm
  • Low shrinkage. Good adhesion and compactness
  • Good toughness and surface appearance

PACKAGING :

  • 25kg bags

COLOUR :

  • Grey powder

Base química: Mortero autonivelante modificado con polímeros

Conservación: 6 meses a partir de la fecha de fabricación

Condiciones de almacenamiento: Conservar en su envase original, bien cerrado y sin daños, en lugar fresco y seco, a una temperatura comprendida entre +5°C y +30°C.

Densidad: ~ 1,9 kg/litre ± 0,05

eResistencia a la abrasión : 12 cm 3 / 50 cm 2 (28 días / +20º C) Fuerza de compresión :> 15 N/mm 2 (24 horas / +20º C) > 25 N/mm 2 (7 días (+20º C) > 30 N/mm 2 (28 días / +20º C) Resistencia a la flexion :> 7 N/mm 2 (28 días / +20º C) Espesor de la capa : 5 mm min. / 25 mm max. Temperatura del ambiente : +8º C min. / +30°C max. Temperatura del soporte : +8º C min. / +30°C max.

Reviews

There are no reviews yet.

Be the first to review “Sikafloor-Level 50 exterior self-levelling mortar 25 kg”

Your email address will not be published. Required fields are marked *

Shopping Cart