Sikafloor®-2020 is a one-component, water-based, coloured acrylic sealant.
– Single-component, water-based product – Good abrasion resistance – Very good UV resistance. No discolouration USES:Sikafloor®-2020 is used as a decorative and dustproof finish for interior and exterior applications on concrete and cement substrates (without permanent contact with water) in :
- Low traffic garages and car parks
- Access to houses, pavements and traffic islands, etc.
- Tennis courts, playgrounds and recreational areas.
BENEFITS :
- Single-component, water-based product
- Good abrasion resistance
- Very good UV resistance. No discolouration
- Resistant to petrol and oil spills.
- Good opacity (covering power)
- Improved strength and flexibility
PACKAGING :
- 20 kg oval plastic buckets
COLOUR :
- Liquid
- Rust red (~ RAL 3009), dark grey (~ RAL 7030), dark green (~ RAL 6010).
- All colours are approximate and may vary depending on application conditions.
Coating thickness ~ 120 μm dry film thickness for two coats (primer + coating). Ambient temperature +10 °C min. / +30 °C max. Relative humidity 80% r.H. max. Dew point Beware of condensation! The substrate and uncured screed must be at least 3°C above the dew point to reduce the risk of condensation or bubbles forming in the screed finish. Note: Low temperatures and high humidity are conditions which increase the likelihood of bubbles forming. Substrate temperature +10°C min. / +30°C max. Substrate Humidity < 6% moisture by weight Analysis method: Sika®-Tramex test, Calcul-CM or oven drying method. No rising damp according to ASTM (polyethylene film).
Reviews
There are no reviews yet.