Single-component, coloured, water-based acrylic coating
Sikafloor®-2020 is a one component, water based, coloured acrylic sealant.
– Single-component, water-based product
– Good abrasion resistance
– Very good UV resistance. No discolouration
USES :
Sikafloor®-2020 is used as a decorative and dustproof finish for interior and exterior applications on concrete and cement substrates (without permanent water contact) in :
- Low traffic garages and car parks
- Access to houses, pavements and traffic islands, etc.
- Tennis courts, playgrounds and recreational areas.
BENEFITS :
- Single-component, water-based product
- Good abrasion resistance
- Very good UV resistance. No discolouration
- Resistant to petrol and oil spills.
- Good opacity (covering power)
- Improved strength and flexibility
PACKAGING :
- 20 kg oval plastic buckets
COLOUR :
- Liquid
- Rust red (~ RAL 3009), dark grey (~ RAL 7030), dark green (~ RAL 6010).
- All colours are approximate and may vary depending on application conditions.
Coating thickness
~ 120 μm dry film thickness for two layers (primer + coating).
Ambient temperature
+10 °C min. / +30 °C max.
Relative air humidity
80% h.r. max.
Dew point
Beware of condensation!
The substrate and uncured screed must be at least 3°C above the dew point to reduce the risk of condensation or bubbles forming in the screed finish.
Note: Low temperatures and high humidity are conditions that increase the likelihood of bubbles forming.
Substrate temperature
+10 °C min. / +30 °C max.
Substrate moisture
< 6 % moisture by weight
Analysis method: Sika®-Tramex test, Calcul-CM or Oven drying method.
No rising damp according to ASTM (polyethylene film).
Reviews
There are no reviews yet.