Bi-component SIKADUR 42 Sp exterior / interior. 20kg
Sikadur -42 SP is a high strength, three component mortar based on solvent free epoxy resins and specially graded fillers, to be applied by casting due to its fluidity and ease of application.
Delivery time : 3 to 5 working days
499,99€ TTC
Sikadur -42 SP is a high strength, three component mortar based on solvent free epoxy resins and specially graded fillers, to be applied by casting due to its fluidity and ease of application.
- Very good adhesion to most building materials: concrete, mortar, stone, brick, fibre cement, steel, glass, polyester or epoxy resins.
- Does not contain solvents.
- Easy mixing, good flow and placement.
APPLICATIONS :
It is a high strength, non-shrinking material. It is suitable for :
- Fixing bolts and anchors on horizontal surfaces.
- Reinforcement anchors in concrete on horizontal surfaces (vertical drilling).
- Filling under bearing plates on bridges or machine beds.
- Filling large cracks and voids in concrete.
BENEFITS :
- Very good adhesion to most building materials: concrete, mortar, stone, brick, fibre cement, steel, glass, polyester or epoxy resins.
- Does not contain solvents.
- Easy mixing, good flow and placement.
- Hardens quickly without shrinkage.
- Moisture does not affect the curing process.
- It has a high mechanical strength. Hard and vibration resistant.
- Impermeable to water vapour.
- It has a high resistance at room temperature to chemical agents such as: diluted acids, bases, salts and brines, very pure water, waste water, oils and fuels.
- It can be used on dry or slightly damp surfaces.
- Does not need priming.
PACKAGING :
- Pre-measured batches of 20 kg.
COLOUR :
Component A: White paste Component B: Dark grey paste Component C: Light sand Mixture A+B+C: Grey
Chemical base: Three-component epoxy resin.
Storage: 24 months from date of manufacture in original packaging
Storage conditions: It should be kept in its original, undamaged, well-closed packaging. In a dry, frost-free place, at temperatures between +5°C and +40°C
Density: Of fresh mixture approx. 1.9 kg/l.
Compressive strength: : 80-90N/ mm2 . (EN 196/1)
Modulus of elasticity in compression : 19 000 N/mm2 ( UNE EN ISO 527)
Flexural strength : 30-40N/ mm2 . (EN 196/1)
Tensile adhesion : On concrete > 3 N/mm2 (concrete failure). Sur acier > 17,5 N/mm2.
Layer thickness : From 6 to 50 mm per layer
Product temperature : +5°C mini. / Maximum +40°C
Ambient temperature: +5°C minimum. / Maximum +40°C
Pot life: Approx. 45-60 minutes. (at 20°C) Consumption :~ 1.9 kg per litre of mixture.
Reviews
There are no reviews yet.