Sika-Level 100 levelling compound 25 kg
Self-levelling, fast-setting cement-based mortar for use between 2 – 10 mm and 10 – 30 mm with added aggregates.
Sikafloor -101 Level is a single component, self-levelling, pumpable, polymer modified, rapid setting cementitious mortar suitable for smoothing and levelling interior floors to be covered.
- Fast application thanks to the high fluidity and cohesion of the fresh product
- Easy to apply by pouring or pumping
- Capable of levelling between 2 and 10 mm (up to 30 mm with added aggregates)
109,20€ TTC
Self-levelling, fast-setting cement-based mortar for use between 2 – 10 mm and 10 – 30 mm with added aggregates.
Sikafloor -101 Level is a single component, self-levelling, pumpable, polymer modified, rapid setting cementitious mortar suitable for smoothing and levelling interior floors to be covered.
- Fast application thanks to the high fluidity and cohesion of the fresh product
- Easy to apply by pouring or pumping
- Capable of levelling between 2 and 10 mm (up to 30 mm with added aggregates)
APPLICATIONS :
Sikafloor®-101 Level can be applied manually or with a pump to level floors between 2 and 10 mm, before covering them with ceramic, stone, carpet, linoleum, PVC, parquet, etc.
- Levelling of small and large areas
- Typical application in shops, residential buildings, etc.
- Levelling up to 30 mm with the addition of 30% aggregate (0-4 mm)
- Base for ceramic, porcelain, marble and other natural stone floors, carpeting, parquet, synthetic floors, etc.
Sikafloor® -101 Level is compatible with the adhesives used for this type of floor covering.
BENEFITS :
- Fast application thanks to the high fluidity and cohesion of the fresh product
- Easy to apply by pouring or pumping
- Capable of levelling between 2 and 10 mm (up to 30 mm with added aggregates)
- Low shrinkage. Good adhesion and compaction
- Fast curing and hardening
- Good surface hardness
PACKAGING :
- 25 kg paper bags
COLOUR
- Grey powder
Chemical basis :
Portland cement with additives
Conservation :
6 months from the date of manufacture
Storage conditions :
The product should be stored properly in its original, unopened and undamaged packaging, in dry conditions and at temperatures between +5º C and +30º C.
Density :
Dust: ~1.65 kg/l
Fresh mortar: ~ 2.03 kg/l
Mixing ratio :
24 ± 1 % by weight of water or 5.75 – 6.25 l per 25 kg of Sikafloor®-101 Level.
Layer thickness :
2 – 10 mm – Sikafloor -101 Level
10 – 30 mm – Sikafloor -101 Level with 30% aggregate by weight of size 0 – 4 mm (7.5 kg sand to 25 kg Sikafloor -101 Level)
Ambient temperature :
5°C min. / 35°C maxi.
Supporting temperature :
5°C min. / 35°C max
Pot life :
| The conditions | Time |
| + 20ºC / 50% HR | 20 to 30 minutes |
Schedules will be affected by temperature variations
T > 20 °C reduce pot life and workability.
T < 20 °C increase service life and handling.
Reviews
There are no reviews yet.