Sika 500 Ceralastic 20 kg
SikaCeram®-500 Ceralastic ES is a flexible, single-component, polymer-modified cementitious mortar with synthetic fibres and alkali resistance, with selected fine aggregates and specific additives, for waterproofing and bonding ceramics to traditional substrates.
- Sealing and bonding mortar in one product.
- Simultaneous waterproofing and bonding of tiles; allows grouting between 12 and 24 hours.
- For gluing large tiles.
- Can be applied to hardened substrates with slight moisture.
- One-coat bonding even with large tiles due to its fluid consistency.
- It does not need reinforcement mesh.
144,00€ TTC
SikaCeram®-500 Ceralastic ES is a flexible, single-component, polymer-modified cementitious mortar with synthetic fibres and alkali resistance, with selected fine aggregates and specific additives, for waterproofing and bonding ceramics to traditional substrates.
- Sealing and bonding mortar in one product.
- Simultaneous waterproofing and bonding of tiles; allows grouting between 12 and 24 hours.
- For gluing large tiles.
- Can be applied to hardened substrates with slight moisture.
- One-coat bonding even with large tiles due to its fluid consistency.
- It does not need reinforcement mesh.
APPLICATIONS :
- Waterproofing: balconies, terraces, swimming pools, bathrooms, showers and tile bonding
BENEFITS :
- Sealing and bonding mortar in one product.
- Simultaneous waterproofing and bonding of tiles; allows grouting between 12 and 24 hours.
- For gluing large tiles.
- Can be applied to hardened substrates with slight moisture.
- One-coat bonding even with large tiles due to its fluid consistency.
- It does not need reinforcement mesh.
- Less material consumption, compared to traditional systems.
- Excellent crack bridging ability.
- Excellent adhesion to all types of substrates: ceramic tiles, concrete, cement, screeds, stone, brick and wood.
PACKAGING :
- 20 kg bags.
COLOUR :
- Grey powder
Chemical base: High-strength cements, selected quartz mineral aggregates, synthetic fibres, polymers and special additives.
Storage: 9 months from date of manufacture
Storage conditions: Store in a cool, dry place in undamaged, closed and sealed original packaging.
Maximum particle size: D max : 0,315 mm
Mixing ratio
Approximately. 4.8L per 20 kg bag
Density of fresh mortar~1.6kg/l
Ambient temperature From +5º to 35º C
Support temperature From +5º to 35º C
curing time 3 * h for transit 12* h for grouting
Pot life approx. 40 minutes.
Opening hours
30 minutes. (Selon EN 12004:2012)
Curing time 3* min.
* The values were measured under conditions of ambient temperature + 23°C and relative humidity. fifty percent. At higher temperatures, the times are reduced, and conversely, at lower temperatures, they are extended.
Reviews
There are no reviews yet.