Sika 260 Flexible white adhesive 22 kg

Cementitious adhesive improved with flexible resins, ready to be used with the addition of water. Suitable for thin-layer fixing of ceramic tiles. SikaCeram -260 Flexible is a high performance, flexible, resin-reinforced cement. A flexible, high performance, resin-reinforced cementitious adhesive, ready to use with only the addition of water, for thin bed ceramic tiles.

USES :

SikaCeram-260 Flexible is suitable for bonding the following types of tiles

• Porcelain tiles
• Low absorption tiles
• SikaCeram®-260 Flexible can be used on the following substrates:
• Concrete and mortar, provided they are flat.
• Brick with the above conditions.
• SikaCeram®-260 Flexible can be used :
• Walls and floors, inside and outside.
• Where high deformability of the adhesive is required.

BENEFITS :

• Thixotropic – Class C2TE / S2
• Easy to use with excellent workability and thixotropic consistency.
• Good flexibility compared to traditional cementitious mortar for tile bonding.
• Low dust content, low dust emission

PACKAGING :

• 22 kg bags

COLOUR :

• Grey and white powder

Chemical basis :
Polymer modified cementitious mortar

Preservation :
12 months from date of manufacture

Storage conditions :
Store properly in the original, unopened and sealed container in a cool, dry place.

Density :
1.4 kg/l (at +20ºC), according to EN 12190

Maximum grain size :
0,3 mm

Transverse deformation :
≥ 0,5 N/mm2 (UNE 12002:2009)

Slip resistance :
≤ 0,5 mm (EN 1308:1997)

INFORMATIONS SUR LE SYSTÈME
System structure Under normal conditions, no primer is required.
The application and consumption of the primers are indicated in the respective product data sheets.

INFORMATION ON THE APPLICATION
Mixing ratio 6.0 – 6.6 l water per 22 kg bag, for white and grey.
Consumption Depends on the flatness and roughness of the substrate, the size of the tiles and the bonding technique (single or double bonding).

As an indication, in kg of powder per m2 :

Trowel :
6×6 mm 10×10 mm

Consumption :
2,5 kg/m2 4 kg/m2

Layer thickness :
3 mm min. / 15 mm max.

Ambient temperature :
+5° C min. / +35° C max.

Substrate temperature :
+5° C min. / +35° C max.

Open time :
~ 1 hour (at +20°C)

Setting time :
~ 10 minutes (à +20°C)

Product applied ready for use at :
+20°