SIKA MonoTop 612 repair mortar grey 10 kg
78,00€ TTC
Sika MonoTop® 612 is a one-component structural repair mortar, reinforced with silica fibre and silica fume, which meets the requirements of class R3 of the UNE-EN 1504-3 standard.
- Clase R3 de la UNE-EN 1504-3.
- Prepared mortar.
- Ready to use with a simple addition of water.
- Regeneration of concrete in thick layers, both on vertical surfaces and on ceilings.
- Smoothing of concrete or cement mortar surfaces prior to the application of paint.
- Repair of concrete elements.
- Grouting of prefabricated elements.
- Suitable for concrete repair work (Principle 3, method 3.1 and 3.3 of UNE-EN 1504 9).
- Repair of spalling and deterioration of concrete in buildings, bridges, infrastructure and superstructures.
- Suitable for structural concrete reinforcement works (principle 4, method 4.4 of standard UNE-EN 1504-9).
- Increasing the load-bearing capacity of concrete structures by adding mortar.
- Suitable for the conservation or restoration of passivation (Principle 7, method 7.1 and 7.2 of UNE-EN 1504-9).
- Increase the coating with additional mortar and restore concrete contaminated by carbonation.
BENEFITS :
- Clase R3 de la UNE-EN 1504-3.
- Prepared mortar.
- Ready to use with a simple addition of water.
- It allows the desired consistency to be achieved without changing the amount of water more than slightly.
- Easy to apply.
- High mechanical strength.
- Adheres perfectly without primer to most building materials (concrete, stone, brick, etc.).
- Mechanical wet spraying.
- It has a “ready-to-paint” finish.
- It is neither corrosive nor toxic.
- Fire classification A1.
PACKAGING :
- 10 kg bags
COLOUR :
- Grey powder
Chemical basis :
Prepared cement mortar, improved with synthetic resins, silica fume and reinforced with polyamide fibres.
Conservation :
12 months from the date of manufacture.
Storage conditions :
In its original, well-sealed and undamaged packaging in a cool, dry and frost-free place.
Density :
Density of fresh mortar: ~ 2.1 kg/l (at +20°C)
Maximum particle size :
0-2mm
Soluble chloride ion content :
| Results (Laboratory) | Requirements (R3) | Test method |
| <0,03 % | <0,05 % | EN1015 |
Mixing ratio :
3,625 litres per 25 kg bag.
Sika® MonoTop® 612/ Water = 100/14.5
Layer thickness :
min 5mm / max.30mm
Ambient temperature :
min +5°C / max. +30ºC
Supporting temperature :
min +5°C / max. +30ºC
Pot life :
| 5ºC | 60 minutes |
| 20ºC | 30 – 40 minutes |
| 30ºC | 15 à 20 minutes |
Consumption
For 1 litre of fresh mix :
Water : 265 g
Sika MonoTop 612 : 1 835 g
This is equivalent to a Sika MonoTop 612 consumption of 1835 kg/m2 and mm thickness.
The minimum Sika MonoTop 612 powder consumption will be 9 175 kg for a layer thickness of 5 mm.
Reviews
There are no reviews yet.