Sikadecor 803 White Bi-component Microcement 30 kg

Polymer mortar coating for levelling surfaces prior to the application of microcement.

SikaDecor-803 Nature is a two-component coating formulated with Portland cement, selected aggregates, additives and high performance synthetic resins for the smoothing of surfaces prior to the application of decorative microcement.

• Pre-measured Product
• Easy to apply on site
• Low shrinkage

USES :

SikaDecor -803 Nature is a suitable product:

• Regularisation of surfaces before the application of decorative micro-cements.
• Filling of tile joints in tiled or screeded substrates before the application of decorative microcement.
  SikaDecor-803 Nature can be used as a regulator on a wide variety of substrates such as :
• Concrete and mortar
• Brick
• Floors and walls with old tiles (for these surfaces it is necessary to use a primer).
• In general, all types of porous substrates
• SikaDecor®-803 Nature can be used on interior and exterior walls and floors.

BENEFITS :

• Pre-measured Product
• Easy to apply
• Low shrinkage

PACKAGING :

• Pre-measured batch of 30 kg

COLOUR :

• White Microcement

Chemical basis :
Two-component polymer mortar

Storage :
12 months from the date of manufacture in its original, unopened and undamaged packaging,

Storage conditions :
In dry weather, at temperatures between +5°C and +25°C. Protect from frost.

Density :
~ 2kg/l (a +20ºC)

Ambient temperature :
min. +8 °C, max. +30 °C

Supporting temperature :
Min. +8 °C, max. +30 °C

Waiting time / Possibility of repainting :
About 24 hours.
Curing times are approximate and may be affected by changes in weather and substrate conditions.

Consumption :
~ 2.0 kg/m2/mm, which corresponds to an approximate coverage of 15 m2.
Consumption may vary depending on substrate conditions (porosity, surface roughness, permeability, etc.).