Elastic waterproofing coating, to be applied “in situ

Single-component liquid waterproofing agent based on water-based styrene-butadiene without solvents that forms an adherent, waterproof, continuous, elastic and resistant membrane.

High elasticity to fill cracks.
It can be immediately covered with any type of hard protection: wood, ceramic tiles, natural or artificial stone, plastic flooring, resin flooring, etc.
Good adhesion to concrete, mortar, plaster, plasterboard, wood-based panels, etc. The adhesion is good even with a wet substrate.

APPLICATIONS :

It is used to create “in situ” waterproofing membranes on interior walls and floors before tiling, in wet areas of residential, administrative, commercial, hotel, university, hospital, sports, industrial and similar buildings.

The most common places where it is used as a waterproofing agent are :

Kitchens
Bathrooms and showers
pool beaches
common areas (stairs, access ramps,…)
Areas with hygienic and sanitary requirements

It should not be left as a top coat, but should be covered later. This coating can be made with, among others, :

ceramic wafers
Natural or artificial stone pieces
Parquet
Panels of different types
Panels of different types

BENEFITS :

High elasticity to fill cracks.
It can be immediately covered with any type of hard protection: wood, ceramic tiles, natural or artificial stone, plastic flooring, resin flooring, etc.
Good adhesion to concrete, mortar, plaster, plasterboard, wood-based panels, etc.
The adhesion is good even with a wet substrate.
Prevents ceramic tiles from sagging in areas affected by moisture.

PACKAGING :

5kg cans

COLOUR :

Light yellow

Chemical basis :

Styrene-butadiene copolymers in aqueous dispersion

Conservation :

12 months from date of manufacture

Storage conditions :

They must be properly stored in their original closed and undamaged packaging. In a cool, dry and frost-free place.

Density :

~ 1,5 kg/litre

Solid content by weight :

~ 72%

Solid content by volume :

~ 59 %

Tensile strength :

~ 2N/ ^mm2

Ambient temperature :

Between +6°C and +35°C

Supporting temperature :

The substrate temperature must be at least 3°C above the dew point

Drying time :

To the touch: 40 minutes.
Total drying time: 70 minutes. (thickness 250μm)

Consumption

To achieve a crack-resistant waterproof coating, a dry thickness of at least 1 mm must be applied. This corresponds to a consumption of 2.2 kg/m ² , to be applied in 2 layers (1.1 kg/m ² and layer). The actual amount of consumption will depend on the roughness and porosity of the substrate.

Reviews

There are no reviews yet.

Be the first to review “Waterproofing Coating SIKALASTIC 850W 5 kg”

Waterproofing Coating SIKALASTIC 850W 5 kg

Reviews

Related products

Sikadecor Pigment 0.5L 15 Color

SIKA THERMOCOAT-7 Profile 4 cm – 5 cm – 6cm – 8 cm -10cm