SIKABOND Metal Mounting Adhesive light grey 0.3L

5/5
Special adhesive for the elastic bonding of metals.

SikaBond AT-Metal is a single-component, solvent-free, elastic adhesive and sealant for porous and non-porous substrates, especially metals. SikaBond® AT-Metal is based on silane-terminated polymer technology.

  • Single component, ready to use.
  • High adhesion without primer to most metals and non-porous substrates
  • Very good adhesion to porous substrates (e.g. concrete, tiles, mortar, etc.)

31,00 TTC

Estimated delivery between 2024/06/05 - 2024/08/19
Special adhesive for the elastic bonding of metals.

SikaBond AT-Metal is a single-component, solvent-free, elastic adhesive and sealant for porous and non-porous substrates, especially metals. SikaBond® AT-Metal is based on silane-terminated polymer technology.

  • Single component, ready to use.
  • High adhesion without primer to most metals and non-porous substrates
  • Very good adhesion to porous substrates (e.g. concrete, tiles, mortar, etc.)

USES :

  • SikaBond® AT-Metal is suitable for interior and exterior sealing and bonding of metal facades and roof elements, roof sheets, plates, seals, skylights, metal cladding etc.
  • SikaBond® AT-Metal has very good adhesion to non-porous substrates, including metals (aluminium, copper, galvanised steel, stainless steel, etc.), and plastics (PVC, powder coatings, etc.)

BENEFITS :

  • Single component, ready to use.
  • High adhesion without primer to most metals and non-porous substrates
  • Very good adhesion on porous substrates (e.g. concrete, tiles, mortar, etc.).
  • excellent handling
  • Short break in thread
  • Good initial tack and fast curing
  • non-corrosive
  • Good weather and water resistance
  • silicone-free
  • Solvent-free

PACKAGING :

  • Cartridges of 300 ml

COLOUR :

  • Light grey

Chemical basis :

Silane-terminated polymers

Conservation :

12 months from the date of manufacture.

Storage conditions :

In its original packaging, well closed and undamaged. Store in a cool, dry place, away from direct sunlight and between +5º C and +25º C.

Density :

~ 1,35 kg/l (ISO1118-3)

Shore A hardness :

38 (after 28 days) (ISO868)

Tensile strength :

1.6N/ mm2 (ISO37)

Secant tensile modulus :

0.7 N/mm 2 sup at 100% elongation (+23°C) (ISO8339)

Elastic recovery :

70 % after 28 days (ISO7389)

Shear strength :

1,15N/ mm2 ; 1 mm thick adhesive (EN1465)

Resistance to tear propagation. :

5.5N/mm (ISO34)

Chemical resistance :

Resistant to water, seawater, diluted alkalis, cement grouts and aqueous detergent dispersions.
Not resistant to alcohols, organic acids, concentrated alkalis and concentrated acids, aromatic and chlorinated hydrocarbons.
It is not or only temporarily resistant to concentrated mineral acids, organic solvents (ketones, esters, aromatics) and alcohols, painted or lacquered coatings, organic acids and caustic solutions or solvents.
For more details, contact the technical department.

Operating temperature :

-40°C to +90°C

Thixotropy :

0 mm,very good (ISO7390)

Ambient temperature :

+5°C min. / +40°C max.

Relative air humidity :

Between 30% and 90%

Supporting temperature :

+5ºC – +40ºC

Substrate moisture :

Sec

Healing index :

3mm / 24h (+23°C / 50% HR) (CQP 049-2)

Skin formation time :

~ 30 minutes (+23°C / 50% HR) (CQP 019-1)

Consumption :

Application of the bonding bead: ~ 44 ml per linear metre (with triangular nozzle)

Reviews

There are no reviews yet.

Be the first to review “SIKABOND Metal Mounting Adhesive light grey 0.3L”

Your email address will not be published. Required fields are marked *

Shopping Cart