Search
Close this search box.

Polyurethane foam SIKA BOOM S 750 ml

5/5
Expanding foam for fixation, cushioning and insulation

Sika Boom -S is a one-component, polyurethane-based expanding foam.

  • Good application even at low temperatures (>+ 5ºC)
  • Fast curing.
  • High degree of expansion.

26,00 TTC

Expanding foam for fixation, cushioning and insulation

Sika Boom -S is a one-component, polyurethane-based expanding foam.

  • Good application even at low temperatures (>+ 5ºC)
  • Fast curing.
  • High degree of expansion.

APPLICATIONS :

Sika Boom®-S is used as a fixing, filling and insulation foam against noise, cold and draughts. As a sealant and insulator in joints around window and door frames, eyelets, holes for air conditioning systems, shutter drums. Fixes, fills and insulates against noise and cold in simple applications.

BENEFITS :

  • Good application even at low temperatures (>+ 5ºC)
  • Fast curing.
  • High degree of expansion.
  • It insulates perfectly from cold and heat.
  • Reduces the transmission of sound and noise
  • ageing resistant
  • Totally CFC-free propellant

PACKAGING :

  • Aerosol 750 ml

COLOUR :

  • Light yellow foam

Chemical basis :

Single-component polyurethane that hardens with relative humidity.

Conservation :

9 months from the date of manufacture. Once opened, they can only be used within 4 weeks.

Storage conditions :

In its original, well-sealed and intact packaging. In a dry place away from the sun at temperatures between +5ºC and +25ºC. The can should be stored in an upright position.

Dimensional stability :

±10% (+23ºC/50% HR)

Operating temperature :

−30 °C à +80 °C (temporarily +100 °C)

Ambient temperature :

Optimum application temperature: +20 ºC
Permissible application temperature: +10 ºC min. / +30ºC max.

Relative air humidity :

Between 30% and 95%.

Supporting temperature :

Min -+5ºC/max +35ºC

Substrate moisture :

Optimum application temperature: +20ºC

Permissible application temperature: +10 ºC min. / +30ºC maximum

Curing time :

Fully cured after 12 hours (at +23 ºC/50% RH).

Cutting time :

~25 minutes. (à +23ºC/50% HR)

Dry to touch :

~10 minutes (à +23ºC/50% HR)

Consumption :

Consumption can be regulated by pressure and valve/adapter type.
Output: 750 ml aerosol can increases to 32 l (+/-3 l)

 

Reviews

There are no reviews yet.

Be the first to review “Polyurethane foam SIKA BOOM S 750 ml”

Your email address will not be published. Required fields are marked *

Shopping Cart