SIKA Sansil 0.3L is a single component, moisture curing, acidic silicone sealant suitable for interior and exteriorapplications.
- Long-term resistance to mould and mildew.
- Excellent UV and weatherresistance.
- Solvent-free (in accordance with European regulations).
Uses
SIKA Sansil 0.3L is suitable for waterproofing toilets and areas where mould resistance is required.
Benefits
- Long-term resistance to mold and mildew.
- Excellent UV and weather resistance.
- Solvent-free (in accordance with European regulations).
- High elasticity and flexibility.
Description du SIKA Sansil 0.3L
- Packaging: 300 cm3 cartridges, 12 cartridges per box.
- Color: Translucent and white
- Chemical base: Moisture curing acetoxy type silicone.
- Shelf life:12 months from the date of manufacture.
- Storage conditions : In its original containers, well closed and not damaged. In a cool, dry place, between +10ºC and +25ºC, away from direct sunlight.
- Density: ~1.0 kg/l (ISO 1183-1)
Certificados / Standards
EN 15651-1 E EXT-INT CC
EN 15651-3 S
Technical information about SIKA Sansil 0.3L
- Shore A hardness: 20 (after 28 days) (ISO 868)
- Tensilestrength: 1.7 N/mm2 (ISO 8339)
- Tensile modulus on drying: 0.35 N/mm2 at 100% elongation (23ºC / 50% r.H.)
(ISO 8339) - Elastic recovery: > 90% (23ºC / 50% RH) (DIN EN 27 389)
- Tear strength: approx. 1.8 N/mm2 (ISO 34)
- Movement capacity: ± 20% (ISO 11600)
- Operating temperature: -40 °C to +100 °C
- Design of the Joint : The joint must be designed according to the movement capacity of the sealant. For joints between 6 and 12 mm wide, a sealing depth of 6 mm is recommended.
Application Information
- Thixotropy: < 1 mm (profil de 20 mm, 23 °C) (ISO 7390)
- Ambient temperature: From +5 °C to +40 °C, min. 3 °C above dew point
- Substrate temperature:+5 °C to +40 °C
- Substrate moisture:the substrate must be dry
- Cure index: 3.0 mm/24 hours (23 °C / 50% r.H.) (EN ISO 291)
- Skin formation time: ~15 minutes (23 °C / 50% RH) (EN ISO 291)
Consumption of SIKA Sansil 0.3L
Joint width |
Seal depth |
Seal length /300 ml |
6 mm |
6 mm |
~8 m |
9 mm |
6 mm |
~5,5 m |
12 mm |
6 mm |
~4 m |
Preparation of the Support
The substrate must be clean and dry, homogeneous, free of oil and grease and loose particles. Paint, laitance and other loose particles must be removed. The rules of good construction practice must be respected. Follow the instructions on the Filler Data Sheet.
Tool cleaning
Clean all tools and application equipment with Sika®TopClean T immediately after use. Once cured, the product can only be removed by mechanical means.
Reviews
There are no reviews yet.