Sikafloor Level-16 is a single-component, dust-free, self-levelling, polymer-modified, pumpable cementitious mortar for levelling and smoothing interior floors.
- Fast application due to good fluidity and cohesion of the fresh product
- Very smooth and non-porous surface
- Easy to apply manually or with a pump
APPLICATIONS :
- Levelling compound for interior floors with uneven surfaces.
- Filling, smoothing and levelling of indoor car parks which are then covered with resins.
- Repair and refurbishment of internal parking pavements.
ADVANTAGES: Sikafloor Level-16 can be applied manually or by pumping to level interior floors with irregularities of between 5 and 15 mm in thickness.
- Fast application due to good fluidity and cohesion of the fresh product
- Very smooth and non-porous surface
- Easy to apply manually or with a pump
- Capable of levelling irregularities between 5 and 15 mm (15-30 mm with the addition of aggregate)
- Low shrinkage and very high adhesion
- good handling
- Quick set-up and drying
- Very good surface appearance and good hardness
- Casein and formaldehyde free
- With dust inhibitor during product mixing
PACKAGING :
- 25kg bags
COLOUR :
- Light grey powder
Chemical base: Polymer-modified rapid-setting mortar
Storage: 6 months from date of manufacture
Storage conditions: In original, unopened, undamaged packaging, protected from frost and moisture, in a cool, dry place between +5 C° and +30 C°.
Density: 1.05 Kg/l ± 0.02 (dry powder) 1.97 Kg/l ± 0.02 (fresh mix)
Compression force :
> 10 N/mm2 (after 24 hours / +20°C) | (EN 13892-2) |
> 30 N/mm2 (after 28 days / +20°C) | (EN 13892-2) |
Flexural strength :
> 3 N/mm2 (after 24 hours / +20°C) | (EN 13892-2) |
> 6 N/mm2 (after 28 days / +20°C) | (EN 13892-2) |
Tensile adhesion :
> 1,5 N/mm2 (after 28 days / +20°C) | (EN 13892-8) |
Thermal resistance:
Coat thickness: 5 mm min. / 15 mm max. 15 mm min. / max. 30 mm, with approx. 30% by weight of quartz sand with a grain size of 0.7 – 1.2 mm or 1.0 – 2.0 mm (7.5 kg per 25 kg bag)
Ambient temperature: +8°C min. / +30°C max. To increase surface strength and better adhesion of the finish floor when using water-based adhesives, it is recommended to apply at ambient and substrate temperatures between +15 °C and +25 °C.
Relative humidity: max. 75%.
Support temperature: +8°C min. / +30°C max.
Pot life :
Time | conditions |
+ 23 °C min. / 50 % h | 30 minutes |
The temperature will affect the pot life. Application at temperatures above +23°C will reduce pot life and workability. Temperatures below +23°C will increase the life of the mix and extend the workability time.
Waiting time / Recoatability: Suitable for overcoating with waterproof or water-repellent coatings after drying (max. 3% humidity), normally achieved after 24 hours. The times are approximate at +23°C and 50% RH and will therefore be affected by changes in surface and ambient conditions, particularly temperature and relative humidity. When Sikafloor Level-16 is to be overcoated, always ensure that the moisture content requirements for the coating product are met, as the waiting time varies according to the thickness of the application and the ambient humidity. Consumption: ~1.6 ± 0.05 kg / m2 / mm This value is theoretical and does not include additional material due to substrate porosity, surface roughness, irregularities, product loss, etc.
Reviews
There are no reviews yet.