Search
Close this search box.
Search
Close this search box.
🔍

Waterproofing glue SIKABOND T8 5L

5/5

115,20€ TTC

Elastic and waterproof adhesive for tile bonding.

It is a one-component elastic tile adhesive.

  • One component, ready to use.
  • Fast curing.
  • Can be glued to old tiles.
  • Reduces stress on the substrate: the elastic adhesive reduces transverse stress between the tile and the substrate.
  • Compensation for tolerances in the bearing surfaces.
  • Good adhesion to most common building materials.

USES :

SikaBond -T8 is an adhesive for waterproofing your ceramic floor. With SikaBond -T8 a waterproofing and bonding layer is created for ceramic parts on concrete, mortar and old tiles. For balconies, terraces, loggias, kitchens, bathrooms and other areas exposed to water.

BENEFITS :

  • One component, ready to use.
  • Fast curing.
  • Can be glued to old tiles.
  • Reduces stress on the substrate: the elastic adhesive reduces transverse stress between the tile and the substrate.
  • Compensation for tolerances in the bearing surfaces.
  • Good adhesion to most common building materials.
  • Bonding and waterproofing in one product.
  • Reduces the transmission of impact noise.

PACKAGING :

  • 5 litre bucket

COLOUR :

  • Ochre

Chemical basis :

Polyurethane

Conservation :

12 months from the date of manufacture.

Storage conditions :

In its original, well-sealed and intact packaging. In a dry and cool place, between +10ºC and +25ºC. Protect from direct sunlight.

Density :

1.35kg/l approx. (ISO1183-1)

Shore A hardness :

Approximately. 35 (after 28 jours) (ISO868)

Tensile strength :

1,5 N / mm2 approx. (ISO37)

Shear strength :

~1 N/mm2 for a layer thickness of 1 mm (EN1465)

Operating temperature :

-40º C à +70º C

Thixotropy :

Consistency :
Spreads easily, trowel marks are stable.

Ambient temperature :

Between +5º C and +35º C. Pay attention to the dew point.

Relative air humidity :

30% – 90%

Supporting temperature :

Between +5º C and +35º C

Substrate moisture :

< 6%
Permitted moisture content of the substrate: < 6% CM

Curing time :

Trafficable 12-24h (depending on weather)
Final treatment 1-2 days (depending on the weather)

Skin formation time/placement time :

~45 min (depending on weather conditions). (CQP 019-1)

Consumption :

Waterproofing layer :
Between 2.0 – 2.7 kg/m 2 with a metal trowel in a 2 mm thick layer (depending on the quality of the substrate).

Coat
Approx. 1.5 kg/m 2 with notched trowel (min. 4 x 4 mm teeth / C1 trowel).

SikaBond -T8 consumption is lower on primed substrates.

 

Related products

Shopping Cart