SikaTop®-209 ES is a pre-dosed, two-component, flexible waterproofing mortar based on cement, selected aggregates and modified polymers.
- Low modulus of elasticity, thus achieving good flexibility, reducing the risk of cracking and improving the ability to fill shrinkage cracks and micro-cracks
- Waterproof and vapour permeable
- Suitable for both positive and negative pressure
APPLICATIONS :
It can be used for waterproofing and surface protection coatings where flexibility is required to fill small cracks. Some of the most common places where it can be used are:
- Tanks, basins, canals or other elements intended to contain water, whether buried or notés
- Internal waterproofing of basements
- External waterproofing of buried walls
- Repair and protection of surfaces exposed to the action of ice and de-icing salts: bridge parapets, terrace and roof overhangs, cornices, etc.
- Protection of concrete structures in the marine environment
- Watertightness in contact with drinking water
BENEFITS :
- Low modulus of elasticity, thus achieving good flexibility, reducing the risk of cracking and improving the ability to fill shrinkage cracks and micro-cracks
- Waterproof and vapour permeable
- Suitable for both positive and negative pressure
- pre-dosed
- Excellent adhesion to sound substrates of concrete, mortar, stone, brick, etc.
- High resistance to ice and de-icing salts
- Slows the progression of carbonation
- Good crack bridging properties
PACKAGING :
Pre-measured batches of 32 kg (8 kg of comp. A and 24 kg of comp. B)
COLOUR :
Component A: White liquid
Component B: Grey powder
Chemical base
Cement mortar improved with synthetic resins
Conservation
12 months from the date of manufacture, in its original packaging, well closed and in good condition, in a dry and cool place.
Storage conditions
The liquid component must be protected from freezing.
Density
Density Density of fresh mortar: ~ 1.70 kg/l (at +20 °C)
Maximum particle size
0,3 mm
Mixing ratio
pre-dosed batches
A:B = 1:3 (by weight)
Layer thickness
Min.1mm / Max. 2mm
Ambient temperature
Min +8°C/ Max. +35°C
Support temperature
Min +8 °C / Max. +35°C
Pot life
~ 30-40 minutes (at +20°C)
Consumption :
~1.7 kg/m 2 and mm thickness depending on the roughness of the substrate
Reviews
There are no reviews yet.